|本期目录/Table of Contents|

[1]王信心,刘 健*,龚正良,等.羧甲基纤维素-丁苯橡胶复合黏结剂在硅基锂离子电池中的应用[J].厦门大学学报(自然科学版),2018,57(04):471-476.[doi:10.6043/j.issn.0438-0479.201803019]
 WANG Xinxin,LIU Jian*,GONG Zhengliang,et al.Application of Carboxymethyl Cellulose and Styrene-butadiene Rubber Binder in Silicon-based Lithium-ion Battery[J].Journal of Xiamen University(Natural Science),2018,57(04):471-476.[doi:10.6043/j.issn.0438-0479.201803019]
点击复制

羧甲基纤维素-丁苯橡胶复合黏结剂在硅基锂离子电池中的应用(PDF/HTML)
分享到:

《厦门大学学报(自然科学版)》[ISSN:0438-0479/CN:35-1070/N]

卷:
57卷
期数:
2018年04期
页码:
471-476
栏目:
研究论文
出版日期:
2018-07-31

文章信息/Info

Title:
Application of Carboxymethyl Cellulose and Styrene-butadiene Rubber Binder in Silicon-based Lithium-ion Battery
文章编号:
0438-0479(2018)04-0471-06
作者:
王信心刘 健*龚正良甘礼惠龙敏南
厦门大学能源学院,福建 厦门 361102
Author(s):
WANG XinxinLIU Jian*GONG ZhengliangGAN LihuiLONG Minnan
College of Energy,Xiamen University,Xiamen 361102,China
关键词:
硅负极 丁苯橡胶 羧甲基纤维素 黏结剂 电化学性能
Keywords:
silicon anode styrene-butadiene rubber(SBR) carboxymethyl cellulose(CMC) binder electrochemical performance
分类号:
TQ 150
DOI:
10.6043/j.issn.0438-0479.201803019
文献标志码:
A
摘要:
黏结剂是影响锂离子电池性能的重要因素之一,将羧甲基纤维素(CMC)和丁苯橡胶(SBR)联合使用,有利于缓解锂离子电池电极的体积效应,但SBR的导电性较差不利于提升电池的电化学性能.为此,制备了不同取代度(0.23~0.86)的低聚合度CMC,并和4种高聚合度CMC分别应用于硅负极,进行循环性能的比较; 采用低聚合度CMC-SBR制备电极,进行电化学性能测试.结果表明,采用低聚合度CMC制备的电极的电化学性能优于高聚合度CMC,且不添加SBR时表现出相对优异的电化学性能,其中取代度为0.55的低聚合度CMC制备的电极循环性能最佳.因此,使用低聚合度CMC时不需添加SBR,既减少了用料成本,又节约了电池内部空间,有利于增加有效的电极材料.
Abstract:
Binder is one of the key materials that affect the electrochemical performance of lithium-ion batteries.Previous research has showed that the combined application of carboxymethyl cellulose(CMC)and styrene-butadiene rubber(SBR)in lithium-ion batteries contributes to reducing volume effect.The high elasticity of SBR is beneficial to the recovery of volume in the charge and discharge cycles,but SBR,occupying the inner space of the battery,is non-conductive and bad in terms of the electrochemical performance.In this study,CMC with low polymerization degree and different degrees of substitution(DS=0.23-0.86)was prepared,and together with 4 types of CMC with high polymerization degree were applied to silicon anode electrode,respectively,and the cycle performance was measured.And then,the CMC with low polymerization degree and SBR were jointly applied to silicon anode and subjected to electrochemical performance tests including galvanostatic discharge-charge,cyclic voltammetry,AC impedance and rate capability,while the experimental results showed that the electrochemical performance of the electrode prepared with CMC(DS=0.55)was the best,and those prepared using CMC with low polymerization degree were better than those of commercial CMC with high polymerization degree.The electrochemical performance of CMC-SBR electrode is inferior to those prepared with CMC alone.Therefore,it is not necessary to add SBR when preparing electrode using CMC with low polymerization degree,and absence of SBR can economize materials cost and save inner space of battery,thereby providing more space for effective electrode materials.

参考文献/References:

[1] 柴丽莉,张力,曲群婷,等.锂离子电池电极粘结剂的研究进展[J].化学通报,2013,76(4):299-306.
[2] HOCHGATTERER N S,SCHWEIGER M R,KOLLER S,et al.Silicon/graphite composite electrodes for high-capacity anodes:influence of binder chemistry on cycling stability[J].Electrochem Solid-State Lett,2008,11(5):A76-A80.
[3] GUERFI A,KANEKO M,PETITCLERC M,et al.LiFePO4 water-soluble binder electrode for Li-ion batteries[J].Journal of Power Sources,2007,163(2):1047-1052.
[4] MAZOUZI D,LESTRIEZ B,ROUé L,et al.Silicon composite electrode with high capacity and long cycle life[J].Electrochem Solid-State Lett,2009,12(11):A215-A218.
[5] OUMELLAL Y,DELPUECH N,MAZOUZI D,et al.The failure mechanism of nano-sized Si-based negative electrodes for lithiumion batteries[J].J Mater Chem,2011,21(17):6201-6208.
[6] 李涛.锂离子电池用硅基材料电化学性能的研究[D].北京:北京有色金属研究总院,2013:1-3.
[7] YU W P,QIAN J C,ZHANG S C,et al.The influence of SBR on the recycling performances of Co3O4 negative electrode in lithium-ion batteries[J].ECS Transactions,2006,1(26):79-85.
[8] HE M,YUAN L X,HU X L,et al.A SnO2@carbon nanocluster anode material with superior cyclability andrate capability for lithium-ion batteries[J].Nanoscale,2013,5(8):3298-3305.
[9] LIU W R,YANG M H,WU H C,et al.Enhanced cycle life of Si anode for Li-ion batteries by using modified elastomeric binder[J].Electrochem Solid-State Lett,2005,8(2):A100-A103.
[10] BUQA H,HOLZAPFEL M,KRUMEICH F,et al.Study of styrene butadiene rubber and sodium methyl cellulose as binder for negative electrodes in lithium-ion batteries[J].J Power Sources,2006,161(1):617-622.
[11] 王香,翟羽,詹薇.羧甲基纤维素钠取代度的测定方法研究[J].食品安全质量检测学报,2015,6(8):3145-3148.
[12] LEE J H,PAIK U,HACKLEY V A,et al.Effect of carboxymethyl cellulose on aqueous processingof natural graphite negative electrodes and their electrochemical performance for lithium batteries[J].Journal of the Electrochemical Society,2005,152(9):A1763-A1769.
[13] LI J,LEWIS R B,DAHN J R.Sodium carboxymethyl cellulose:a potential binder for si negative electrodes for Li-ion batteries[J].Electrochem Solid-State Lett,2007,10(2):A17-A20.
[14] LI M Q,QU M Z,HE X Y,et al.Effects of electrolytes on the electrochemical performance of Si/graphite/disordered carbon composite anode for lithium-ion batteries[J].Electrochim Acta,2009,54(19):4506-4513.
[15] LESTRIEZ B,BAHRI S,SANDU I,et al.On the binding mechanism of CMC in Si negative electrodes for Li-ion batteries[J].Electrochem Commun,2007,9(12):2801-2806.

备注/Memo

备注/Memo:
收稿日期:2018-03-07 录用日期:2018-04-25
基金项目:厦门大学校长基金(20720150090); 厦门大学能源发展基金(2017NYFZ02)
*通信作者:jianliu@xmu.edu.cn
引文格式:王信心,刘健,龚正良,等.羧甲基纤维素-丁苯橡胶复合黏结剂在硅基锂离子电池中的应用[J].厦门大学学报(自然科学版),2018,57(4):471-476.
Citation:WANG X X,LIU J,GONG Z L,et al.Application of carboxymethyl cellulose and styrene-butadiene rubber binder in silicon-based lithium-ion battery[J].J Xiamen Univ Nat Sci,2018,57(4):471-476.(in Chinese)
更新日期/Last Update: 1900-01-01