|本期目录/Table of Contents|

[1]王翠萍,陈 冰,陈悦超,等.Nb-Cr-Mo三元系相图的实验测定与热力学计算[J].厦门大学学报(自然科学版),2018,57(03):300-307.[doi:10.6043/j.issn.0438-0479.201705024]
 WANG Cuiping,CHEN Bing,CHEN Yuechao,et al.Experimental Investigation and Thermodynamic Calculation of the Phase Diagram in the Nb-Cr-Mo Ternary System[J].Journal of Xiamen University(Natural Science),2018,57(03):300-307.[doi:10.6043/j.issn.0438-0479.201705024]
点击复制

Nb-Cr-Mo三元系相图的实验测定与热力学计算(PDF/HTML)
分享到:

《厦门大学学报(自然科学版)》[ISSN:0438-0479/CN:35-1070/N]

卷:
57卷
期数:
2018年03期
页码:
300-307
栏目:
研究论文
出版日期:
2018-05-31

文章信息/Info

Title:
Experimental Investigation and Thermodynamic Calculation of the Phase Diagram in the Nb-Cr-Mo Ternary System
文章编号:
0438-0479(2018)03-0300-08
作者:
王翠萍陈 冰陈悦超张锦彬卢 勇杨水源施 展刘兴军*
厦门大学 材料学院,福建省材料基因工程重点实验室,福建 厦门 361005
Author(s):
WANG CuipingCHEN BingCHEN YuechaoZHANG JinbinLU YongYANG ShuiyuanSHI ZhanLIU Xingjun*
Fujian Provincial Key Laboratory of Materials Genome,College of Materials,Xiamen University,Xiamen 361005,China
关键词:
Nb-Cr-Mo三元系 相图 CALPHAD 热力学计算
Keywords:
Nb-Cr-Mo ternary system phase diagram CALPHAD thermodynamic calculation
分类号:
TG 113.1
DOI:
10.6043/j.issn.0438-0479.201705024
文献标志码:
A
摘要:
采用电子探针显微分析(EPMA)和X射线衍射(XRD)技术,对Nb-Cr-Mo三元系在1 000和1 200 ℃时全成分的等温截面相图进行了实验测定,并结合实验数据和已报道的相平衡实验信息,基于CALPHAD(calculation of phase diagrams)方法,对Nb-Cr-Mo三元系相图进行了热力学优化与计算,获得了自洽性良好的热力学参数,计算结果与实验数据取得了良好的一致性.
Abstract:
In this work,the phase diagrams of the Nb-Cr-Mo ternary system at 1 000 ℃ and 1 200 ℃ were experimentally determined using a combined method of electron probe microanalysis and X-ray diffraction on the equilibrated alloys.Based on the experimental results from this work and literatures,the Nb-Cr-Mo ternary system was thermodynamically calculated using CALPHAD(calculation of phase diagrams)method,and self consistent thermodynamic parameters were obtained.The calculated results agreed well with the experimental data.

参考文献/References:

[1] TITRAN R H.Niobium and its alloys[J].Advanced Materials and Processes,1992,142(5):34-41.
[2] TANG L,MA C L,ZHAO X Q.Effect of Cr on microstructure and fracture toughness of Nb-20Ti-16Si-xCr alloys[J].Rare Metal Materials and Engineering,2009,38(Sup.3):8-12.
[3] MA C L,LI J G,TAN Y,et al.Effect of B addition on the microstructures and mechanical properties of Nb-16Si-10Mo-15W alloy[J].Materials Science and Engineering:A,2004,384(1/2):377-384.
[4] SHAH D M,ANTON D L,POPE D P,et al.In-situ refractory intermetallic-based composites[J].Materials Science and Engineering:A,1995,192/193:658-672.
[5] ZHENG H,LU S,JIANYE Z,et al.Effect of Al additions on the oxidation behavior of Laves phase NbCr2 alloys at 1 373 K and 1 473 K[J].International Journal of Refractory Metals and Hard Materials,2009,27(3):659-663.
[6] ZELENITSAS K,TSAKIROPOULOS P.Effect of Al,Cr and Ta additions on the oxidation behaviour of Nb-Ti-Si in situ composites at 800 ℃[J].Materials Science and Engineering:A,2006,416(1):269-280.
[7] FUJIKURA M,KASAMA A,TANAKA R,et al.Effect of alloy chemistry on the high temperature strengths and room temperature fracture toughness of advanced Nb-based alloys[J].Materials Transactions,2004,45(2):493-501.
[8] MIURA S,HATABATA T,OKAWA T,et al.Effect of alloying elements on Nb-rich portion of Nb-Si-X ternary systems and in situ crack observation of Nb-Si-based alloys[J].Metallurgical and Materials Transactions A,2014,45(3):1136-1147.
[9] SUN Z,GUO X,GUO B.Effect of B and Ti on the directionally solidified microstructure of the Nb-Si alloys[J].International Journal of Refractory Metals and Hard Materials,2015,51:243-249.
[10] DOKUMACI E,?ZKAN I,?ZYIGIT M B,et al.Effect of boronizing on the oxidation of niobium[J].International Journal of Refractory Metals and Hard Materials,2013,41:276-281.
[11] SHA J,HIRAI H,TABARU T,et al.Effect of carbon on microstructure and high-temperature strength of Nb-Mo-Ti-Si in-situ composites prepared by arc-melting and directional solidification[J].Materials Science and Engineering:A,2003,343(1):282-289.
[12] LIU A Q,SUN L,LI S S,et al.Effect of cerium on microstructures and high temperature oxidation resistance of an Nb-Si system in-situ composite[J].Journal of Rare Earths,2007,25(4):474-479.
[13] YANG Y,BEWLAY B P,CHEN S L,et al.Effect of Cr addition on the multiphase equilibria in the Nb-rich Nb-Si-Ti system-thermodynamic modeling and designed experiments[C]∥MRS Proceedings.Cambridge:Cambridge University Press,2008:1128-U05-42.
[14] KASHYAP S,TIWARY C S,Chattopadhyay K.Effect of gallium on microstructure and mechanical properties of Nb-Si eutectic alloy[J].Intermetallics,2011,19(12):1943-1952.
[15] ZHENG P,SHA J B,LIU D M,et al.Effect of Hf on high-temperature strength and room-temperature ductility of Nb-15W-0.5Si-2B alloy[J].Materials Science and Engineering:A,2008,483/484:656-659.
[16] LI W,YANG H B,SHAN A D,et al.Effect of Mo addition on the phase stability of β-Nb5Si3phase[J].Intermetallics,2006,14(4):392-395.
[17] ZHENG P,SHA J B,LIU D M,et al.Effect of Si content on mechanical properties of Nb-Si based alloys with Nbss/Nb5Si3 structure[J].Transactions of Nonferrous Metals Society of China,2006,16(A3):2030-2033.
[18] WU M L,LI S S,JIANG L W,et al.Effect of trace Zn,P and Mg additions on microstructure and mechanical properties of Nb-Si-Ti alloys[J].Progress in Natural Science:Materials International,2011,21(2):139-145.
[19] KIM H S,KIM W Y,LIM S H.Microstructure and elastic modulus of Ti-Nb-Si ternary alloys for biomedical applications[J].Scripta Materialia,2006,54(5):887-891.
[20] ZHANG S,GUO X.Effects of B addition on the microstructure and properties of Nb silicide based ultrahigh temperature alloys[J].Intermetallics,2015,57:83-92.
[21] GENG J,TSAKIROPOULOS P,SHAO G.The effects of Ti and Mo additions on the microstructure of Nb-silicide based in situ composites[J].Intermetallics,2006,14(3):227-235.
[22] COSTA NETO J G,FRIES S G,LUKAS H L,et al.Thermodynamic optimisation of the Nb-Cr system[J].Calphad,1993,17(3):219-228.
[23] XIONG W,DU Y,LIU Y,et al.Thermodynamic assessment of the Mo-Nb-Ta system[J].Calphad,2004,28(2):133-140.
[24] QU S,HAN Y F,SONG J X,et al.Effects of Y and Ce on microstructures and properties of Nb-Si system composites[C]∥Proceedings of 2004 International Conference on Rare Earth Research and Application(Ⅲ).Baotou:[s.n.],2004:197-200.
[25] SVECHNIKOV V M,KOBZEBKO G F.Investigation of the system chromiumniobium-molybdenum [R].Ukrainian SSR:Institue of Physics of Metals,Academy of Sciences,1964.
[26] STEIN F,HE C,WOSSACK I.The liquidus surface of the Cr-Al-Nb system and reinvestigation of the Cr-Nb and Al-Cr phase diagrams[J].Journal of Alloys and Compounds,2014,598:253-265.
[27] PIERRE V.Pauling file in:inorganic solid phases,Springer Materials[DB/OL].[2017-05-11].https:∥materials.springer.com/isp/phase-diagram/docs/c_0925871.
[28] VENKATRAMAN M,NEUMANN J P.The Cr-Mo(chromium-molybdenum)system[J].Bulletin of Alloy Phase Diagrams,1987,8(3):216-220.
[29] FRISK K,GUSTAFSON P.An assessment of the Cr-Mo-W system[J].Calphad,1988,12(3):247-254.
[30] DINSDALE A T.SGTE data for pure elements[J].Calphad,1991,15(4):317-425.
[31] REDLICH O,KISTER A T.Algebraic representation of thermodynamic properties and the classification of solutions[J].Industrial & Engineering Chemistry,1948,40(2):345-348.

备注/Memo

备注/Memo:
收稿日期:2017-05-11 录用日期:2017-07-06
基金项目:国家自然科学基金(51471138); 国家重点基础研究专项基金(2016YFB0701401); 科技部国际科技合作专项(2014DFA53040)
*通信作者:lxj@xmu.edu.cn
引文格式:王翠萍,陈冰,陈悦超,等.Nb-Cr-Mo三元系相图的实验测定与热力学计算[J].厦门大学学报(自然科学版),2018,57(3):300-307.
Citation:WANG C P,CHEN B,CHEN Y C,et al.Experimental investigation and thermodynamic calculation of the phase diagram in the Nb-Cr-Mo ternary system[J].J Xiamen Univ Nat Sci,2018,57(3):300-307.(in Chinese)
更新日期/Last Update: 1900-01-01